EDM Hole Driller Filtration System
Ebbco Hole Driller Filtration System serves as a complete dielectric system for up to two Small Hole EDM machines for DI or Non-DI Water applications. Standard system includes a set of ten (10) gallon clean/dirty tanks, stainless steel filter pump, Stainless steel filter housing with a 5 Micron Cartridge and optional Stainless Steel ½ cu.ft. DI resin vessel for DI water applications. Sytsems come standard with a 110 volt on/off electrical control. Optional conductivity meter and Inline Chillers are available.
Above filter system include a 5 Micron filter cartridges unless otherwise stated on purchase order.
|SHEDM-924-P-0183||Hole Driller Filtration System with Stainless Steel Filter Vessel for Non-DI applications|
|SHEDM-924-P-DI-173||Hole Driller Filtration System with Stainless Steel Filter Vessel for DI water applications |
|EDM-PC-6000IL-115||6,000 BTU/HR Inline Chiller 115 vac/1Phase|
|-CM||Digital Conductivity Meter with Probe and Solenoid Valve|
|-OZN||Ozone Generator Adder|
|-3PH||3 Phase Electrical Available|